IEMIM

3UG4624-1CS20-DIGITAL MONITORING RELAY
3UG4632-1AW30-Digital monitoring relay Voltage monitoring, 22.5 mm from 10 to 600 V AC/DC 0vershoot and undershoot 24 to 240 V AC/DC 50 to 60 Hz DC and AC Noise pulses delay 0.1 to 20 s Hysteresis 0.1 to 300 V 1 change-over contact with or without
3UG4625-1CW30-Digital monitoring relay for residual current monitoring (with current transformer 3UL23) Setting range 0.03...40 A separate for warning threshold and switch-off value supply voltage 24 ... 240 V AC/DC, 50 .. 60Hz ON delay and trippi
3UG4512-1AR20-Phase failure and sequence 3x160-690 V analog monitoring relay phase failure and sequence 3 x 160...690 V 50...60 Hz AC 1 changeover contact screw terminal
3UG4616-1CR20-Phase sequence phase failure 3x160-690 V screw digital monitoring relay for 3-phase voltage with N-conductor connectable phase sequence phase failure 3 x 90 to 400 V 50 to 60 Hz AC undervoltage and overvoltage 90-400 V hysteresis 1-2
3UF7010-1AU00-0-Basic unit SIMOCODE pro V PB PROFIBUS DP interface 12 Mbit/s, RS 485, 4I/3O freely parameterizable, Us: 110...240 V AC/DC, input for thermistor connection Monostable relay outputs, expandable by extension modules
3UG4501-1AW30-Analog monitoring relay Fill level monitoring Resistance monitoring from 2 to 200 kohm 0vershoot and undershoot 24 to 240 V AC/DC 50 to 60 Hz DC and AC 2-step or 1-step control Tripping delay 0.5 to 10 s 1 change-over contact screw t
TPRVM001-Voltage interface module, TeSys island, 690VAC 47-63 Hz, Isolated switching input for safe stop
TPRPM080-Power module, TeSys island, 80A at AC-1, 80A at AC-3, 37kW, 50hp
TPRSM001-SIL interface module, TeSys island, 24VDC, Isolated switching input for safe stop
TPRST065-Motor starter, TeSys island, 80A at AC-1, 65A at AC-3, 30kW, 40hp, DOL type
TPRPM038-Power module, TeSys island, 40A AC-1, 38A AC-3, 18.5kW, 20hp
TPRPM009-Power module, TeSys island, 15A at AC-1, 9A at AC-3, 4kW, 5hp
TPRST009-Motor starter, TeSys island, 15A at AC-1, 9A at AC-3, 4kW, 5hp, DOL type
LUCL18FU-Standard control unit, TeSys U, 4.5-18A, 3P motors, magnetic protection, coil 110-240V AC/DC
LUFN02-auxiliary contacts LUF - 2NC
LUFN11-Auxiliary contacts, TeSys Ultra, 1NO + 1NC, 250VAC/DC, Power pole status, screw terminal
LUCL12ES-Standard control unit, TeSys U, 3-12A, 3P motors, magnetic protection, coil 48-72V AC/DC
LUFN20-auxiliary contacts LUF - 2NO
LUCB32FU-Advanced control unit, TeSys U, 8-32A, 3P motors, protection & diagnostic, class 10, coil 110-240V AC/DC

Inteqrə edilmiş Mühərrik İşəsalıcılar və Mühafizə (Integrated motor starters and protection )