IEMIM

652651-EMFA 63A YANDAN KOLLU YILDIZ-ÜÇGEN ŞALTER
TSP-0.55-TS Serisi 0,30-0,55A Kutulu Termik Şalter
TSP-0.32-TS Serisi 0,18-0,32A Kutulu Termik Şalter
TPRST080-Motor starter, TeSys island, 80A at AC-1, 66A at AC-3, 37kW, 40hp, DOL type
TPRST038-Motor starter, TeSys island, 40A at AC-1, 38A at AC-3, 18.5kW, 20hp, DOL type
3UG4511-1AP20-Phase sequence monitoring 3x320-500 V 1 CO analog monitoring relay phase sequence monitoring 3 x 320...500 V 50...60 Hz AC 1 changeover contact screw terminal
3UG4632-1AW30-Digital monitoring relay Voltage monitoring, 22.5 mm from 10 to 600 V AC/DC 0vershoot and undershoot 24 to 240 V AC/DC 50 to 60 Hz DC and AC Noise pulses delay 0.1 to 20 s Hysteresis 0.1 to 300 V 1 change-over contact with or without
3UG5512-1AR20-Monitoring relay phase failure, phase sequence and asymmetry monitoring 3x 160-690 V AC, 15-70 Hz 1 changeover contact screw terminal
3UG5511-1AR20-Monitoring relay phase sequence monitoring 3x 160-690 V AC, 15-70 Hz 1 changeover contact screw terminal
3UG4624-1CS20-DIGITAL MONITORING RELAY
TPRVM001-Voltage interface module, TeSys island, 690VAC 47-63 Hz, Isolated switching input for safe stop
TPRPM080-Power module, TeSys island, 80A at AC-1, 80A at AC-3, 37kW, 50hp
TPRST065-Motor starter, TeSys island, 80A at AC-1, 65A at AC-3, 30kW, 40hp, DOL type
TPRPM038-Power module, TeSys island, 40A AC-1, 38A AC-3, 18.5kW, 20hp
TPRPM009-Power module, TeSys island, 15A at AC-1, 9A at AC-3, 4kW, 5hp
LUFN11-Auxiliary contacts, TeSys Ultra, 1NO + 1NC, 250VAC/DC, Power pole status, screw terminal
LUFN20-auxiliary contacts LUF - 2NO
LUCL12ES-Standard control unit, TeSys U, 3-12A, 3P motors, magnetic protection, coil 48-72V AC/DC
LUCB12BL-Advanced control unit, TeSys U, 3-12A, 3P motors, protection & diagnostic, class 10, coil 24V DC
LUCB18BL-Advanced control unit, TeSys U, 4.5-18A, 3P motors, protection & diagnostic, class 10, coil 24V DC

Inteqrə edilmiş Mühərrik İşəsalıcılar və Mühafizə (Integrated motor starters and protection )

IEMIM

652651-EMFA 63A YANDAN KOLLU YILDIZ-ÜÇGEN ŞALTER

TSP-0.55-TS Serisi 0,30-0,55A Kutulu Termik Şalter

TSP-0.32-TS Serisi 0,18-0,32A Kutulu Termik Şalter

TPRST080-Motor starter, TeSys island, 80A at AC-1, 66A at AC-3, 37kW, 40hp, DOL type

TPRST038-Motor starter, TeSys island, 40A at AC-1, 38A at AC-3, 18.5kW, 20hp, DOL type

3UG4511-1AP20-Phase sequence monitoring 3x320-500 V 1 CO analog monitoring relay phase sequence monitoring 3 x 320...500 V 50...60 Hz AC 1 changeover contact screw terminal

3UG4632-1AW30-Digital monitoring relay Voltage monitoring, 22.5 mm from 10 to 600 V AC/DC 0vershoot and undershoot 24 to 240 V AC/DC 50 to 60 Hz DC and AC Noise pulses delay 0.1 to 20 s Hysteresis 0.1 to 300 V 1 change-over contact with or without

3UG5512-1AR20-Monitoring relay phase failure, phase sequence and asymmetry monitoring 3x 160-690 V AC, 15-70 Hz 1 changeover contact screw terminal

3UG5511-1AR20-Monitoring relay phase sequence monitoring 3x 160-690 V AC, 15-70 Hz 1 changeover contact screw terminal

3UG4624-1CS20-DIGITAL MONITORING RELAY

TPRVM001-Voltage interface module, TeSys island, 690VAC 47-63 Hz, Isolated switching input for safe stop

TPRPM080-Power module, TeSys island, 80A at AC-1, 80A at AC-3, 37kW, 50hp

TPRST065-Motor starter, TeSys island, 80A at AC-1, 65A at AC-3, 30kW, 40hp, DOL type

TPRPM038-Power module, TeSys island, 40A AC-1, 38A AC-3, 18.5kW, 20hp

TPRPM009-Power module, TeSys island, 15A at AC-1, 9A at AC-3, 4kW, 5hp

LUFN11-Auxiliary contacts, TeSys Ultra, 1NO + 1NC, 250VAC/DC, Power pole status, screw terminal

LUFN20-auxiliary contacts LUF - 2NO

LUCL12ES-Standard control unit, TeSys U, 3-12A, 3P motors, magnetic protection, coil 48-72V AC/DC

LUCB12BL-Advanced control unit, TeSys U, 3-12A, 3P motors, protection & diagnostic, class 10, coil 24V DC

LUCB18BL-Advanced control unit, TeSys U, 4.5-18A, 3P motors, protection & diagnostic, class 10, coil 24V DC